Setting The Clock; Use Your Player As An Alarm Clock; Fall Asleep While Listening To Your Player; Sound Quality Adjustment - LG XA63-A0U Quick Start Manual

Setting the Clock

1. Press for at least 2 seconds:
2. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display)
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:

Use your player as an alarm clock

Press and hold TIMER on the player for two seconds. Each function,
TUNER, CD, USB flashes for two seconds. Press SET on the player when
the function you want to be woken by is showing.
If you choose TUNER you will be shown the stations you have saved as
presets. Use ./> on the player to select the station you want, then
press SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use ./> on the player to change the hours
and minutes and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use ./> on the player to change
the hours and minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use ./> on the player to change the volume and SET to save. Switch
the system off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
10

Fall asleep while listening to your player

Press SLEEP on the remote control one or more times to select delay time
ON PLAYER
between 10 and 180 minutes, after the player will turn off. Press SLEEP on
CLOCK
the remote control repeatedly, the display changes in the following order,
corresponding icons & dimmer ON → SLEEP 180 (dimmer ON) → SLEEP
./>
150 (dimmer ON) → SLEEP 120 (dimmer ON) → SLEEP 90 (dimmer ON)
→ SLEEP 80 (dimmer ON) → SLEEP 70 (dimmer ON) → SLEEP 60 (dim-
SET
mer ON) → SLEEP 50 (dimmer ON) → SLEEP 40 (dimmer ON) → SLEEP
./>
30 (dimmer ON) → SLEEP 20 (dimmer ON) → SLEEP 10 (dimmer ON) →
SET
SLEEP OFF & (dimmer OFF).
./>

Sound quality adjustment

SET
You can choose sound impressions. Press EQ on the remote control
repeatedly, the display changes in the following order, NORMAL →
NATURAL → ARABIC → AUTO -- EQ (Only MP3/WMA file) → POP →
CLASSIC → ROCK → JAZZ.

VSM (Virtual Sound Matrix)

You can select the Virtual sound. Press VSM on the remote control to set
the virtual sound.
• ON STAGE : The sound fills Concert hall
• VIRTUAL : Realtime 3D positioned sound rendering technology with
stereo sources, optimized for stereo speakers. Listeners may experience
amazing virtual surround effects with their own multimedia players.

About MP3/WMA

MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be "ISO 9660"
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback
MP3 files. We recommend that you use "Easy-CD Creator", which creates
an ISO 9660 file system.
• Do not use special letters such as "/ : * ? " < >"etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.