Panasonic SC-HT920 Operating Instructions Manual page 33

Menus
The Setup menu cannot be
accessed.
Picture abnormal or un-viewable
Picture distorted.
Picture size doesn't fit the
screen.
Menu not displayed correctly.
Auto zoom function does not
work well.
The picture on the television
disappears or stripes appear on
the screen.
Progressive video
There is ghosting when
progressive output is on.
Pictures not in progressive
output.
Closed captions not displayed.
Listening to the radio
Noise is heard.
"ST" flickers or doesn't light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
Television operation
Cannot operate the TV.
Unit displays
The display is dark.
"NO PLAY"
"NO DISC"
"F61"
"DVD U11"
"ERROR"
"DVD H∑∑"
∑∑ stands for a number.
Television displays
"/"
"Cannot display group xx,
content xx"
"This disc may not be played in
your region"
No on-screen display.
≥Select "DVD/CD" as the source.
≥Cancel all group, program and random play.
≥Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
≥Change "TV Aspect" in "Video" tab.
≥Use the television to change the aspect. If your television does not have that function, change
"4:3 Aspect" in Display Menu.
≥Change the Zoom setting.
≥The images on PAL system DVD-Audio are compressed for display. They may also appear
vertically stretched.
≥Restore the zoom ratio to a1.00.
≥Set "Subtitle Position" in Display Menu to "0".
≥Set "4:3 Aspect" in Display Menu to "Normal".
≥Turn off TV's zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work depending on the
type of disc.
≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna.
≥The television antenna wire is too close to the unit. Separate the antenna wire of the television
from the unit.
≥Change "Video Output Mode" in Picture Menu to "480I". This problem is caused by the editing
method or material used on DVD-Video, but should be corrected if you use interlace output.
≥Press [PROGRESSIVE] on the main unit so "PROG." is displayed. Or select "480P" in "Video
Output Mode" in Picture Menu.
≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be
interlace.
≥When progressive output is on, closed captions will not be displayed.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
≥Turn the television off or separate it from the unit.
≥Separate the antenna from other cables.
≥Press [TV] first to operate the television.
≥Check the remote control code for the TV manufacturer.
≥Select "Bright" in "FL Dimmer" in "Others" tab.
≥You inserted a disc the unit cannot play; insert one it can.
≥You inserted a blank disc.
≥You haven't inserted a disc; insert one.
≥You haven't inserted the disc correctly; insert it correctly.
≥Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
≥Disc is dirty. Wipe it clean.
≥Incorrect operation performed. Read the instructions and try again.
≥Trouble may have occurred. The number following "H" depends on the status of the unit. Turn
the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply
cord, and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a qualified service
person.
≥The operation is prohibited by the unit or disc.
≥You are trying to display incompatible contents.
≥You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked "ALL". Confirm the region number for the unit
on the rear panel.
≥Select "On" in "On-Screen Messages" in "Display" tab.
Page
—
15
8
20
19
14
—
14
19
19
—
14
—
—
23
—
19
12, 19
8
—
—
23
—
—
—
29
21
11
—
—
12
5, 7
11
—
—
—
—
17
Cover
21
RQT7696
33