Using On-Screen Menus - Panasonic SC-HT920 Operating Instructions Manual

Using on-screen menus

(Refer to page 10 for remote control button positions.)
1
DISPLAY
Press once.
(When pressed twice, the elapsed play
time indicator appears ‹ below.)
Items shown differ depending on the
type of software.
Main Menu
Program To start from a specific item
Group
Title
Chapter
Track
Playlist
Content
To skip incrementally or decrementally
(Time Slip)
1 Press [ENTER] twice to show Time Slip
2 Press [3 4] to select the time and press
Time
To start from a specific time (Time Search)
To change remaining/elapsed time display
(‹ page 14)
Audio
[WMA] [MP3]
To display the current bitrate or sampling
frequency
∫ Elapsed play time indicator
(Except [JPEG])
Other Settings
[DVD-A] (Motion picture part) [RAM] [DVD-V]
To change play speed
– from k0.6 to k1.4 (in 0.1 unit steps)
≥After you change the speed
Play Speed
– Output is in stereo.
– Sampling frequency of 96 kHz is converted
∫ Play Menu
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
Repeat
(‹ page 15)
Except [JPEG] [RAM] (Still picture part)
To repeat a specified section
A-B Repeat
Press [ENTER] at the starting and ending
points. Press [ENTER] again to cancel.
RQT7696
18
2
Select
Return to the
previous menu
Select the menu.
indicator.
[ENTER].
≥Press and hold [3 4] to alter faster.
Condition—play, pause, or slow/search
Current playback item
to 48 kHz.
3
Go to the
next menu
ENTER
ENTER
Register
Register
Make the settings.
Still Picture
Thumbnail
Subtitle
Marker (VR)
Angle
Rotate Picture
Slideshow
Current position
Press [3 4] to select the elapsed
play time or the remaining time.
Marker
4
DISC 1 DISC 2 DISC 3
Select
1 2 3
DISC 4 DISC 5
4 5 6
7 8 9
ENTER
S10
0
To switch still pictures
To show thumbnail images
(‹ page 14)
[RAM]
To recall a marker recorded on DVD-Video
recorders
To recall a marker: [3 4] ‹ [ENTER]
(with multiple angles)
To select the angle
To rotate picture
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
(Except [RAM])
To mark up to 5 positions to play again
Press [ENTER] (The unit is now ready to
accept markers.)
To mark a position: [ENTER] (at the desired
point)
To mark another position: [2 1] ‹ [ENTER]
To recall a marker: [2 1] ‹ [ENTER]
To erase a marker: [2 1] ‹ [CANCEL]
≥This feature does not work during program
and random play.
DISPLAY
Press to exit.