Playing While You Are Recording; Selecting Audio To Record - Panasonic DMR-EH55S Operating Instructions Manual

Playing while you are recording

[HDD] [RAM]
Playing from the beginning of the title you are
recording—Chasing playback
Press [1] (PLAY) during recording.
≥There is no sound output while searching forward or backward.
To stop play
Press [∫].
To stop recording
2 seconds after play stops
Press [∫].
To stop scheduled recording
1 Press [∫] to stop playing.
2 2 seconds after play stops
Press [∫], then press [2, 1] to select "Stop recording" and press
[ENTER].
(Scheduled recording ➡ 28)
Playing a title previously recorded while recording—
Simultaneous rec and play
≥You can also change the drive and play while recording. Press
[DRIVE SELECT] to select the HDD or DVD recording drive.
1
Press [DIRECT NAVIGATOR] during
recording.
2
Press [3, 4, 2, 1] to select a title
and press [ENTER].
≥There is no sound output while searching forward or
backward.
To stop play
Press [∫].
To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1 Press [DIRECT NAVIGATOR] to exit screen.
2 If the recording is on the other drive
Press [DRIVE SELECT] to select the HDD or DVD recording
drive.
3 Press [∫].
To stop scheduled recording
1 Press [∫] to stop playing.
2 Press [DIRECT NAVIGATOR] to exit screen.
3 If the recording is on the other drive
Press [DRIVE SELECT] to select the HDD or DVD recording
drive.
4 Press [∫], then press [2, 1] to select "Stop recording" and press
[ENTER].
(Scheduled recording ➡ 28)

Selecting audio to record

[HDD] [RAM]
Press [AUDIO].
[.
Stereo: Main audio (stereo)
l
≥If the broadcast is "MonoiSAP", audio will be
v
l monaural even if you select Stereo mode.
l
SAP Secondary audio program (SAP)
≥If recorded in SAP mode, main audio is also
l
Audio:
l recorded.
v
a-
Mono: Main audio (monaural)
≥Select "Mono" if reception is poor during a stereo
broadcast.
e.g., "Stereo" is selected
HDD Hard-Drive
"((" appears when the unit is receiving the audio
type you selected.
CH 12
Stereo
((
≥If you change the sound setting while recording, the recorded
sound will also change.
[Note]
You cannot change the audio type in the following cases while the
unit is stopped, regardless of which drive is selected.
≥While a disc other than DVD-RAM is inserted.
≥When "Enable High-Speed Mode" is set to "On" (➡ 61). (The
default setting is "On".)
≥When the recording mode is XP and "Audio for XP Recording" is
set to "LPCM" (➡ 62).
[-R] [-RW‹V›] [+R] [+RW]
[HDD] [RAM] (When recording sound in LPCM)
[HDD] [RAM] (When "Enable High-Speed Mode" is set to "On")
Select the audio (Main or SAP) in "Multi-
channel TV Sound ( MTS )" in the Setup
menu (➡ 62).
RQT8365
27