Disc And Card Handling; Unit Care; Inserting/Removing The Sd Card - Panasonic DMR-EH55S Operating Instructions Manual

Disc and card handling

∫ How to hold a disc or card
Do not touch the recorded
surface or the terminal
surface.
∫ Concerning non-cartridge discs
Be careful about scratches and dirt.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe
dry.
∫ Handling precautions
≥Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
≥Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by
such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.

Unit care

The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit's lens over time, making it
impossible to record or play discs.
Use the DVD lens cleaner (RP-CL720PP) about once every year,
depending on frequency of use and the operating environment.
Carefully read the lens cleaner's instructions before use.

Inserting/Removing the SD card

When the card indicator ("SD") on the unit's display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
≥Inserting foreign objects can cause a malfunction.
≥You can use SD Memory Cards with capacities from 8 MB to 2 GB (➡ 6).
Opening the cover
Press the protruding
part to open the cover.
Automatic drive select function
≥If you insert an SD card while the unit is stopped, the "SD Card Operations" screen is displayed. Press [3, 4] to select an item and press
[ENTER] to switch to the SD drive ( ➡ 40, 54).
If you remove an SD card, the HDD drive is automatically selected.
Keep the small memory cards such as the SD Memory Card out of reach of children. If swallowed, seek
RQT8365
medical advice immediately.
10
Inserting the card
Press on the center of
If you are using a
the card until it clicks into
miniSD
place.
into the miniSD
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with the cut-off
corner on the right.
(Do not forget to close the cover. ➡ right)
≥Do not expose the terminals of the card to water, garbage or other
strange things.
≥Do not drop, stack, or impact discs. Do not place objects on them.
≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as
heart shapes.
≥Do not place in the following areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
–Locations susceptible to significant difference in temperature
(condensation can occur).
–Where static electricity or electromagnetic waves occur.
≥To protect discs from scratches and dirt, return them to their cases
or cartridges when you are not using them.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
[Note]
Do not obstruct the rear panel's internal cooling fan.
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the
unit.
Removing the card
1
TM card, insert it
2
TM card
ADAPTER
Closing the cover
Press on the center
of the card.
Pull it straight out.