Rheem Multipak MPE02 Owner's Manual And Installation Instructions page 2

Warning: Upon completion of the installation and commissioning of the water heater, leave this
guide with a responsible officer or the householder. DO NOT leave this guide inside of the cover of
the water heater, as it may interfere with the safe operation of the water heater or ignite when the
water heater is turned on.
RESPONSIBLE OFFICER AND INSTALLER PLEASE NOTE
This Owner's Guide and Installation Instructions is shared for the Australian and New Zealand markets.
Where the content of this document is specific to either market, it is marked with either
AU for Australian specific content or NZ for New Zealand specific content.
The 862627 models in natural gas and propane gas fuel types are sold in Australia.
References to Universal LP Gas models do not apply to the Australian market.
The 862627 models in natural gas and Universal LP Gas fuel types are sold in New Zealand.
References to propane gas models do not apply to the New Zealand market.
An electronic copy of these Owner's Guide and Installation Instructions can be downloaded from
rheem.com.au and rheem.co.nz.
Rheem Australia Pty Ltd and Rheem New Zealand Limited are the suppliers of the Rheem range of continuous flow gas
water heaters, manufactured in Japan by Paloma Co., Ltd., a world leader in water heater technology and manufacture.
PATENTS
This water heater may be protected by one or more patents or registered designs in the name of
Rheem Australia Pty Ltd, Rheem New Zealand Limited or Paloma Co., Ltd.
Operation design of the Hot Water System is protected by Australian Patent No 2007201101
TRADEMARKS
® Registered trademark of Rheem Australia Pty Ltd., or Rheem New Zealand Limited.
™ Trademark of Rheem Australia Pty Ltd., or Rheem New Zealand Limited.
Note: Every care has been taken to ensure accuracy in preparation of this publication.
No liability can be accepted for any consequences, which may arise as a result of its application.
2