Hdmi (High Definition Multimedia Interface) Input Connection - Panasonic CT-36HL44 Operating Instructions Manual

O E
PTIONAL QUIPMENT
Optional Equipment Connections (cont.)
HDMI (High Definition Multimedia Interface)
input connection
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standards,
enhanced and high definition video formats as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP
be connected to an EIA/CEA 861
electronic device, such as a set top box or DVD player
equipped with an HDMI or DVI output connection. By
inputting a High-bandwidth Digital Content Protection
(HDCP) high definition picture source to the HDMI terminal
of this television, high definition pictures can be displayed
on the screen in their digital form. The HDMI input terminal
is not intended to be used with personal computers. This
television is compatible with 1080i, 480p and 480i formats.
Select the output of the connecting device to match that of
the television.
Notes:
1. HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
Compatible formats
This television is compatible with the following formats.
Please set the connecting device to the following format.
Video signal
Format No. of dots
1080i 1920 x 1080i
720 x 480p
540p (480p)
640 x 480p
540p (480i) 720 x 480i
Audio signal
When digital audio is included in the HDMI connection,
the compatible sampling frequencies are 48 KHz /
44.1KHz / 32 KHz.
8
C
ONNECTIONS
1
input can
2
compliant consumer
Vertical scanning
frequency (Hz)
59.94 / 60
59.94 / 60
59.94 / 60
59.94 / 60
Connection diagram
Follow the diagram below to connect the television to a set top
box or a DVD player.
TERMINALS ON BACK OF TELEVISION
HDMI
AV IN
COMPONENT
1
VIDEO INPUT
Y
P
B
P
R
L
ANT
Incoming
AUDIO
Cable
IN
R
CABLES NOT INCLUDED
Note: Use analog audio when
digital audio is not available
* The connector on the television is HDMI Type A connector.
Procedure
• Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the television.
• Press TV/VIDEO button on the remote control to select
HDMI input. The interface on the television is an HDMI
Type A connector.
• If the external device has a DVI output only, use a DVI to
HDMI adaptor cable*
the television. Also, connect the Audio Out signal from
the external device (set top box or DVD player) to the
4
Audio In* jacks below the HDMI input.
• If you cannot display the picture because your Digital Set
Top Box does not have a Digital Out terminal setting, use
the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.
Note:
*3. HDMI-DVI conversion cable (TY-SCH03DH) available
on Panasonic Website: www.panasonic.com.
*4. Please refer to page 19 for Audio setting detail.
2
S-VIDEO
VIDEO
INPUT PROG
OUT
VIDEO
L
TO AUDIO
AMP
R
1 2 3
HDMI
OUT
L
AUDIO
OUT
R
EXTERNAL DIGITAL
COMPONENT
3
to connect to the HDMI jack on