RH WYETH SPLIT BAMBOO FLOATING ROUND ENTRY TABLE Instructions

PARTS INCLUDED
A [1] TABLETOP
B [1] TABLE BASE
ASSEMBLY INSTRUCTIONS
1. Unpack all parts and place them on a protected work surface.
2. Place the tabletop (A) onto the table base (B). Adjust the
tabletop to make sure that the position hole at the underside
and the location pin on the top of the base are aligned. Attach
the tabletop to the base using flat washers (3), spring washers
(2), and steel bolt (1). Tighten all bolts with Allen key
(4) provided. Shown in Detail A.
Hole on the top of table base
DETAIL A
CARE INSTRUCTIONS
1. To clean, use a soft, dry or damp cloth.
2. Do not use any abrasive cleansers.
IMPORTANT SAFETY INSTRUCTIONS
1. For your safety, it is recommended that more than two adults assemble.
2. These instructions are provided for your safety. It is important that they are read carefully and completely before assembly.
WYETH SPLIT BAMBOO FLOATING ROUND ENTRY TABLE INSTRUCTIONS
RH
HARDWARE INCLUDED
NO. ITEM
amm::::I
1
"'
@
2
@
3
4
QTY.
DESCRIPTION
4 pcs.
Steel bolt M6 x 45
4 pcs.
Spring washer
4 pcs.
Flat washer
1 pc.
Allen key
Page 1 of 2