Installation; Important Safety Instructions - Toro TEMPUS-AG-4G User Manual

Step 1

INSTALLATION

TEMPUS-AG-4G ELECTRICAL WIRING
Regardless of the power supply or solar panel, the wiring is the same. The connection of the power cable is
made by a 2-core cable for which there is no polarity.
• Remove the upper and lower part of the TEMPUS-AG-4G by rotating them.
• Insert the SIM card (If not already inserted)
During the first installation it is necessary to charge the TEMPUS-AG-4G, turned off, for 24 hours with 120 VAC
power supply.
1.1 Power supply
• Drill the grommet located under the lower part of the TEMPUS-AG-4G
• Pass the cable through the grommet.
• Connect the cable to the green connector.
(No polarity to respect)
Power transformer connection and recommendations

IMPORTANT SAFETY INSTRUCTIONS:

This product must be installed in accordance
with the applicable installation code and local
jurisdiction by a person familiar with the
construction, installation and operation of the
product and the hazards involved.
The use of or installation of junction boxes,
conduit bodies, conduit connections, and fittings
shall be for the installation and intended use, and
in accordance with applicable electrical code.
consult with a qualified electrician and local
electrical codes before installing any electrical
product.
Disconnect all power before servicing. ensure
main ac breaker is off. Failure to comply may
result is serious injury due to electrical shock
hazard.
18AWG outdoor wiring. Sheathed cable/flexible
cord shall be Hard Service Cord, or Junior Hard
Service Cords suitable for the application and in
accordance with the NEC
120V
Main circuit
Waterproof box for electrical connexions.
Supplied by end user. Listed waterproof electrical junction
body and conduit in accordance with NEC/NFPA 70
Toro TEMPUS-AG-4G
3