Related Manuals for Wavecom TnT RCD
Summary of Contents for Wavecom TnT RCD
- Page 1 Wavecom TnT RCD Portable Appliance Tester User Manual + Certificate of Warranty and Product Support Information...
- Page 2 At Wavecom we take great pride in our customer service and support. We provide assistance, troubleshooting and support over the phone, via Skype or Facetime, via email or in person to help you get the most from your Wavecom Portable Appliance Tester. To be eligible for our support Wavecom Certificate services you must register your product.
-
Page 3: Table Of Contents
Powering on the Tester TnT RCD Diagrams LED Indicators Tester Diagram Power Switch TnT RCD Testing Menu – Main Menu A TnT RCD Testing Menu – Main Menu B Meter Mode ® [Not available in Battery Mode] Specifications Technical Information... -
Page 4: Precautions
Using the TnT RCD on Mains Power Competent Person To use the TnT RCD on mains power, simply plug in the supplied power cable and connect it to a mains power To ensure that all electrical equipment or devices are inspected, tested and tagged correctly, regulations outlet. -
Page 5: Powering On The Tester
TnT RCD is fully charged before the first use. Your TnT RCD will be powered on automatically when you connect it to mains power. To power on your TnT RCD in battery mode, press and hold the rear power button until the unit beeps and the LCD screen turns on. -
Page 6: Tnt Rcd Testing Menu - Main Menu B
1. Complete a Visual Inspection, and inspect the compliance plate to ensure the appliance is a Class 2 appliance. Look for the double insulated symbol, seen here. Displayed parameters are: 2. Plug the appliance into the appliance test socket of the TnT RCD • Volts AC 3. - Page 7 3. Plug the appliance into the Appliance Test Socket of the TnT RCD 4. If testing a Class 1 Appliance, plug the IEC Clamp Cable into the IEC socket of the TnT RCD, then clamp it onto earthed metal on the appliance 5.
- Page 8 Once 0mA limit is reached the value will then loop over and start again from 500mA. RCD, turn PRCD on. Enter - Sets the selected current for the next trip time test. The TnT RCD will then return to the current trip time test Conducting the Ramp Test screen.
-
Page 9: Specifications
Insulation Test: 500VDC / 250VDC. Pass level greater than 1MΩ. Measurement: 0.1Ω to 10MΩ. *See also Leakage Test 1. Conduct a visual inspection, and inspect the compliance plate to determine the expected results 2. Plug in the appliance to the appliance test socket on your TnT RCD. Extension Leads 3. -
Page 10: Technical Information
DUT, as there is insufficient current generated by the TnT RCD. To perform this test, a continuous earth loop must be made between the exposed conductive material (metal) and the TnT RCD appliance tester. This is done by means of connecting the earth lead with the crocodile... -
Page 11: Leakage Test
Note: While in Battery mode, all LEDs will be off as no mains connected and supply mains test is not carried out. NOTE: The maximum resistive load for the TnT RCD is 10 Amps, and the maximum load for the TnT RCD 20A is 20 Amps... -
Page 12: Wavecom Tags
All of the Wavecom tags are suitable for printing using every brand of thermal transfer printers available from around the world. The adhesive used on our tags is most aggressive and comes highly recommended for use in the electrical test and tag industry, there should be no butterflying once applied. -
Page 13: Purchase Information
Tester Serial Number Purchase Information Date of Purchase Sold By The TnT RCD is proudly designed and manufactured in Australia by Wavecom. Wavecom SA Wavecom WA Wavecom VIC 257 Grange Road, Unit 2/17 Casino Street, Mark Kennedy Findon SA, 5023...