Related Manuals for Wavecom TnT Titan 20A
Summary of Contents for Wavecom TnT Titan 20A
- Page 1 Wavecom TnT Titan 20A Portable Appliance Tester User Manual + Certificate of Warranty and Product Support Information...
- Page 2 (see rear cover of this manual). The Manufacturer (Wavecom Instruments Pty. Ltd.) warrants its products against defects in materials and workmanship for a period of 12 months from the date of purchase. During the warranty period, the Manufacturer will repair (or at its option replace at no charge) the product that proves to be defective.
- Page 3 At Wavecom we take great pride in our customer service and support. We provide assistance, troubleshooting and support over the phone, via Skype or Facetime, via email or in person to help you get the most from your Wavecom Portable Appliance Tester. To be eligible for our support services you must register your product.
-
Page 4: Table Of Contents
TnT Titan 20A User Manual Wavecom Important Information Contents TnT Titan Diagrams Precautions Using the Tablet Operating the TnT Titan Powering on the Tester Using the TnT Titan with WinPATS Setting up the Barcode Scanner LED Indicators TnT Titan Testing Menu – Main Menu A TnT Titan Testing Menu –... -
Page 5: Important Information
TnT Titan 20A User Manual Wavecom Important Information Contents • • TnT Titan Portable Appliance Tester IEC Power Cable (10A units) • • WinPATS voucher (valued at $30+GST) for App Purchase IEC 20/10 Power Cable with Circuit Breaker (20A Units) •... -
Page 6: Tnt Titan Diagrams
It is advised not to put unit to charge when it is unattended or overnight. Transporting Lithium Ion Battery Products It has come to the attention of Wavecom Instruments Pty Ltd, that products containing batteries are being shipped by customers through air freight. It is our understanding that, for the purpose of air transport,... - Page 7 When sending the TnT Titan for calibration, please turn off the battery isolation switch which is located on the rear panel of the tester. If you have any questions about the battery of your TnT Titan please contact Wavecom for further advice.
-
Page 8: Using The Tablet
In the next section you will find a short introduction to using the TnT Titan with your tablet, and more detailed, step by step guides are available on our website - www.wavecom.com.au The tablet provided is intended for use with WinPATS only - using additional apps (other than those already installed) may interfere with the functions of WinPATS and may slow down the app significantly. -
Page 9: Operating The Tnt Titan
TnT Titan 20A User Manual Wavecom Operating your TnT Titan Powering on the Tester To use your TnT Titan, ensure the isolation switch (located on the rear of the tester) is switched ON. We recommend that the TnT Titan is fully charged before the first use. - Page 10 To connect your TnT Titan, go to the Test menu in the WinPATS App (at the top of the screen). You should be prompted to connect a Wavecom Appliance Tester as soon as you open the Test Menu for the first time. Tap...
- Page 11 You will now be asked to register your TnT Titan - this allows you to receive product support, service and calibration reminders from Wavecom. Once complete, tap Register. You’re now ready to start testing with WinPATS! Connecting via USB You can also connect to your TnT Titan via USB if needed.
- Page 12 TnT Titan 20A User Manual Wavecom Connect your cables in the sequence shown below. Your TnT Titan USB-B port is located inside the storage Micro USB to Micro USB USB A Cable WinPATS USB-A USB-B USB-A USB-B to USB Hub or...
- Page 13 TnT Titan 20A User Manual Wavecom Adding a Site Note: You can also add a new site during the ‘Adding an Item’ process if needed. To add a new Site to WinPATS, open the Side Menu, then tap ‘Database+’, then tap ‘Sites’. You can view your existing sites (and filter by Customer) in the list, and edit or delete your sites by tapping a site in the list.
- Page 14 Follow the relevant steps and your test results will be assigned to the item you select/create. If you have a Wavecom tag printer, you can print a tag at the end of this process. Otherwise you can now continue with your testing.
-
Page 15: Setting Up The Barcode Scanner
‘Update Item’ when complete. You can also edit multiple items at once - view the ‘Managing your Inventory with WinPATS’ video on the Wavecom Youtube channel for more information. Deleting Items Items in your database can be deleted from the Inventory screen. To open the Inventory screen, open the Side Menu, tap ‘Database+’... -
Page 16: Led Indicators
TnT Titan 20A User Manual Wavecom LED Indicators Battery LEDs The battery LED indicators display how much charge is remaining in your TnT Titan. Use the table below for reference. 100% - Battery is fully charged 20% (LED 2 will be flashing) -
Page 17: Tnt Titan Testing Menu - Main Menu A
TnT Titan 20A User Manual Wavecom If there is a fault with the mains power connection, you may see one (or more) of the Indicator LEDs turn red. This may indicate a serious issue with the mains power supply - consult a qualified professional before proceeding. -
Page 18: Tnt Titan Testing Menu - Main Menu B
TnT Titan 20A User Manual Wavecom Class 2 Test - Double Insulation Test – Menu A - F2 The Double Insulation Test completes the following test sequences as part of its procedure: 1. Integrated Supply Mains Test - Refer to Integrated Test section 2. - Page 19 TnT Titan 20A User Manual Wavecom TnT Titan Testing Menu – Main Menu B Use the Enter button to switch between Menu A and Menu B. All tests on Menu B require a Mains Power source. Power Test - Menu B – F1 The Power Test is for the purposes of monitoring and performance of equipment.
- Page 20 9. A warning will be displayed on screen - ensure the appliance is safely located, then press F3 to power the appliance and continue the leakage test 10. Your results will appear on the screen - If you have a Wavecom tag printer you can now print the tag, otherwise you can now end the test.
- Page 21 To avoid tripping large areas in the work place monitored by the switchboard RCD it is suggested that an Isolation Transformer be used. Wavecom Instruments offer an Isolation Transformer, designed specifically for the purposes of field RCD tripping. Do not use these transformers for any other purpose. Rated 240VAC In, 240VAC Out @ 30VA.
- Page 22 TnT Titan 20A User Manual Wavecom F1 - Raises the trip current in 1mA increments to 500mA. Hold the button and the value will scroll faster the longer it is pressed. Once 500mA limit is reached the value will then loop over and start again from 0mA F2 - Decreases the trip current in 5mA increments.
-
Page 23: Meter Mode ® [Not Available In Battery Mode]
5. TnT Titan testers will switch to battery power (if charged) and stay on, but will need to be Mains Powered again to conduct further RCD tests. 6. If you have a Wavecom tag printer you can now print the tag, otherwise you can now end the test. Meter Mode®... - Page 24 TnT Titan 20A User Manual Wavecom Watts A watt is the unit used to measure the amount of actual flowing electrical energy. Volt-Amps A volt-amp is the unit used to measure the apparent electrical power used by computing equipment. Mathematically, it is expressed as volts times amps (V*A). Because it represents the amount of energy computing systems may draw from a power grid, Volt-Amp measurements are used to determine the kind of wiring and circuit breakers required to support the computing equipment in question.
-
Page 25: Specifications
Current Ramp Trip Test: 0 to 500mA in 1mA increments. Power Measurement Leakage Current: 0 to 30.0mA at 200 to 265V Load Current: 0.0 to 10Amp (20Amp for TnT Titan 20A) Voltage: 200 to 265VAC Power Factor: 0.00 to 1.00... -
Page 26: Technical Information
TnT Titan 20A User Manual Wavecom Technical Information Visual Inspection Visual inspection has to be done before any other test is carried out using the TnT Titan. The visual inspection is carried out to ensure there are no physical faults with the appliance before testing. -
Page 27: Class 2 (Double Insulated) Construction
TnT Titan 20A User Manual Wavecom and the TnT Titan appliance tester. This is done by means of connecting the earth lead with the crocodile clip/probe attached to a GOOD earth point (paint & coatings will not provide effective connections) and the appliance plugged into the TnT Titan appliance testers’... -
Page 28: Leakage Test
NOTE: The maximum resistive load for the TnT Titan is 10 Amps, and the maximum load for the TnT Titan 20A is 20 Amps A Leakage Test applies power to the Device Under Test (DUT) and measures the imbalance of leakage current from the DUT between the active and neutral conductors. -
Page 29: Integrated Tests
TnT Titan 20A User Manual Wavecom Integrated Tests Mains Supply Test Note: The Mains Supply Test only applies when connected to Mains Power - if you are using your TnT Titan in battery mode, you can disregard this. The Supply Mains Test checks the polarity and connectivity of the mains supply by LED’s. This test is also a part of all the testing functions of this unit. -
Page 30: Wavecom Tags
All of the Wavecom tags are suitable for printing using every brand of thermal transfer printers available from around the world. The adhesive used on our tags is most aggressive and comes highly recommended for use in the electrical test and tag industry, there should be no butterflying once applied. - Page 31 At the time of developing this manual, all care and consideration for accuracy has been implemented. Wavecom accepts no responsibility for any errors or omissions in this document. This is partly based on the fact that Electronics & Electrical testing and specifications worldwide are constantly changing and that Local, State and National Regulatory Authorities may also have differing or additional requirements.
-
Page 32: Purchase Information
WinPATS Android App Discount Coupon (Valid for one use only) Purchase Information Date of Purchase Sold By The TnT Titan 20A is proudly designed and manufactured in Australia by Wavecom. Wavecom SA Wavecom WA Wavecom VIC 257 Grange Road, Unit 2/17 Casino Street,...