Pick Up Roller & Solenoid - Samsung SCX-4200/XAZ Service Manual

5.21 Pick Up Roller & Solenoid
1. Before you remove the Pick Up Roller & Solenoid,
you should remove:
- Middle Cover Unit (Refer to 5.9)
- LSU (Refer to 5.12)
- Drive Ass'y (Refer to 5.14)
- Feed Bracket and Gear (Refer to 5.19 steps 4~6)
2. Remove the Pick Up Gear Ass'y, as shown below.
Pick Up Gear
Ass'y
3. To remove the Pick Up Ass'y, first lift the notch
attached to the Bush so that it's released from the
shaft, then slide the Pick Up Ass'y from right to left
and it will be released completely, as shown below.
Bush
1
2
Pick Up Ass'y
Samsung Electronics
4. Remove the two screws and then remove the Regi
Solenoid and Pick Up Solenoid.
(Pick Up)
Solenoid
(Manual)
Solenoid
Disassembly and Reassembly
Service Manual
5-23