Smps - Samsung SCX-4200/XAZ Service Manual

Disassembly and Reassembly

5.17 SMPS

1. Before you remove the SMPS, you should remove:
- Engine Shield Ass'y (Refer to 5.15)
2. Remove the two screws then take the Inlet Bracket
out, as shown below.
3. Unplug the Engine Harness from the SMPS and then
remove the one screw securing the ground cable, as
shown below.
Engine Harness
Service Manual
5-18
Inlet Bracket
4. Remove the three screws and take the SMPS out.
SMPS
Samsung Electronics