Menu Navigation
Setup
Press the MENU key to activate the main menu and select Setup. (refer to page 24)
CH
VOL
OK
VOL
CH
Program CH
Input Setup
Lets you specify the antenna mode (Cable only, Cable/Antenna or Antenna only).
1
CH
VOL
OK
VOL
CH
2
CH
VOL
OK
VOL
CH
3
CH
VOL
OK
VOL
CH
Notes:
• Auto Scan is necessary when you select the input signal for the first time or whenever you change the antenna
configuration.
TM
• If CableCARD
is not inserted, the Auto scan performs Scan All.
• When CableCARD
TM
• When CableCARD
TM
performed.
• In order to manually select Antenna B from the remote, Auto Scan must first be performed.
36
Press to select the menu.
Press to display the sub-menu.
Press to select Input Setup.
Press to enter the sub-menu field.
Press to select the antenna mode.
Press to enter your selection.
• The confirmation message appears.
Press to start Auto Scan.
All available channels with a signal will be programmed into memory.
is inserted and Cable only is selected, Auto Scan will be skipped.
is inserted and Cable/Antenna is selected, Antenna (B) Analog & Digital Auto Scan will be
Program Channel
Input Setup
Setting
Cable/Antenna
Auto Scan
Manual Program
Signal Meter
Language