Symbols - Weidmüller EPG CUT 40 Original Operating Instructions

2.5 Symbols

The symbols and labels described below are
used within these instructions and as imprints
on the tool. Every operator shall be familiar with
these symbols.
Symbol Description
Read the operating instructions and
safety notes before using the tool.
Warning of sharp blade edges.
The tool must not be used to cut
steel.
The tool must not be used in damp
places or in places where there is
a risk of dripping water.
Return button for manual pressure
release
Power supply: Direct current (DC)
voltage
Conformity marking
20 2516410000/03/07.2019