Troubleshooting Guide - Maxwell MW-4001 Instruction Manual

ENGLISH
Note:
- switching on of the repeat modes can be per-
formed from the playback mode, pause or stop
mode.
- to cancel repeat modes, press the (12) REP
button several times, until "REP", "REP ALL" or
"RAND" disappear.
Programming the playback of tracks
You can program playback of tracks (maximum
99) in the desired order.
1. In the STOP mode, press the (4) PROG+10
button once, the flashing "PROG" symbol and
"P01" symbol will appear on the display.
2. Press the buttons (15)
sired track.
3. To store the selected track in memory press
the PROG+10 button, "P02" (6), in which the
next track can be recorded, will appear on the
display (refer to p. 2).
Problem
Radio
Noise while listening to radio sta-
tions in FM or AM band
The unit does not playback sta-
tions in FM or AM band
Disc
Disc is not played back
Some tracks cannot be played
back
Disc is in its place but tracks can-
not be played back
4001_NEW.indd 8 4001_NEW.indd 8
4. You can program up to 99 tracks, when the
5. To playback tracks in the programmed order,
6. To cancel programmed playback of tracks

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble or
bad playback. If you consider that there is some-
thing wrong with the unit, check possible causes
in this table.
/ to select the de-
If you have not managed to solve the problem,
apply to the nearest authorized service center.
Possible cause
The station is not tuned
FM band: the antenna is not
extended
АМ band: the unit is not
oriented to the transmitting
station
The FUNCTION switch is not
set o the RADIO position
Low volume level
The FUNCTION switch is not
set to the CD position
Disc is absent or set improp-
erly
Disc is scratched or dirty
Disc is placed improperly
Disc is scratched or dirty
Improper disc format
8
number of the memory cells is exceeded,
"FUL" will appear on the display.
press the button (11).
press the button (5) , open the lid (7) of the
disc compartment or set the (2) FUNCTION
switch to another position.
Tune the station
Extend the antenna
Try to rotate the body of the
player around its axis
Set the FUNCTION switch to
the RADIO position
Increase volume level
Set the FUNCTION switch to
the CD position
Check the disc, it should be
placed with its label upwards
Wipe the disc with a soft cloth,
do not use the damaged discs
Check the disc, it should be
placed with its label upwards
Wipe the disc with a soft cloth,
do not use the damaged discs
Use discs with corresponding
format
Solution
15.07.2011 10:54:22 15.07.2011 10:54:22