Maxwell MW-4001 Instruction Manual page 7

Programming the playback of tracks
You can program playback of tracks (maximum
20) in the desired order.
1. In the STOP mode, press the (4) PROG+10
button once, the flashing "PROG" symbol and
"P01" symbol will appear on the display.
2. Press the buttons (15)
sired track.
3. To store the selected track in memory press
the PROG+10 button, "P02" (6), in which the
next track can be recorded, will appear on the
display (refer to p. 2).
4. You can program up to 20 tracks, when the
number of the memory cells is exceeded,
"FUL" will appear on the display.
5. To playback tracks in the programmed order,
press the button (11).
6. To cancel programmed playback of tracks
press the button (5) , open the lid (7) of the
disc compartment or set the (2) FUNCTION
switch to another position.
Playback of МР3 files from a disc
Qualitative sound, without interferences and
malfunction is guaranteed only at playback of
the licensed discs, but depending on software of
the manufacturer of the disc or burning speed,
problems while reading the disc by the unit can
appear as well.
Playback of files
1. Plug in the unit.
2. Select the CD playback mode. Set the (2)
FUNCTION switch to the CD position, lighting
of the display (6) will light up.
3. After reading of the information total number
of folders "F", total number of tracks will ap-
pear on the display (6), playback of the first
track from the first folder of the disc will start.
Playback symbols ►║ will be displayed (6),
the track number will take turns with the folder
number, format of the track " MP3" or " WMA"
will be displayed in the upper part of the dis-
play.
4. If the damaged disc inserted "no" will appear
on the display (6).
Playback
- In the stop mode press the button (11), play-
back will start, " ►║ , will be displayed (6), the
track number will take turns with the folder num-
ber, format of the track " MP3" or " WMA" will be
displayed in the upper part of the display.
- In the playback mode to move 10 tracks for-
ward, press the (4) PROG +10 button.
4001_NEW.indd 7 4001_NEW.indd 7
Pause
- To pause the playback press the button (11),
the ►║ and the number of the track will be flash-
ing on the display (6).
- To resume the playback, press the button (11)
once again.
/ to select the de-
Stop the playback
- To stop the playback press the button (5) , to-
tal number of the tracks on the disc will appear
on the display (6).
Moving to the beginning of the previous track
or to the next track.
- During the playback or in the pause mode, to
move to the previous or the next track press the
buttons (15)
Moving to the playback of a certain fragment
of a track
- In the playback mode press and hold the but-
tons (15)
of a certain fragment of a track.
Note:
- in the quick moving to the fragment of a track
mode, when one of the buttons (15)
pressed, the sound is not played back.
- with long pressing or holding the (15)
ton, playback will start from the beginning of the
track, in which certain place of the playback of
the track fragment was selected.
Repeated playback of a track or a disc
- To repeat one track press the (12) REP once,
"REP" will appear on the display.
Repeated playback of the album
(ALBUM)
To repeat all tracks of the album (one of the fold-
ers "F") press the (12) REP button twice, "AL-
BUM" will appear on the display.
Repeated playback of all tracks on
the disc
- To repeat all tracks on the disc press the (12)
REP three times, "REP ALL" will appear on the
display (6).
Random playback of the recorded tracks
- To playback all tracks in the random order,
press the (12) REP button four times, "RAND"
will appear on the display (6).
7
ENGLISH
/ .
/ for quick moving to the playback
/ is
but-
15.07.2011 10:54:21 15.07.2011 10:54:21