Screen Menu - Sony Bravia KDL-40D3500 Operating Instructions Manual

Screen menu

Target Inputs
Screen Format
Auto Format
4:3 Default
Display Area
Horizontal Shift
Vertical Shift
Vertical Size
Selects whether to apply settings made in the "Screen" menu to all inputs, or only to
the input currently being watched.
"All": Applies settings to all inputs.
"Viewing Only": Applies settings only to the current input.
For details about the screen format, see "To change the screen format manually to
suit the broadcast" on page 14.
Automatically changes the screen format according to the broadcast signal. To keep
your setting, select "Off".
z
Even if "Auto Format" is set to "On" or "Off", you can always modify the format of the screen
by pressing repeatedly.
Selects the default screen format for use with 4:3 broadcasts.
"Smart": Displays conventional 4:3 broadcasts with an imitation wide screen effect.
"4:3": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Screen Format" setting when the channel or input is
changed.
Adjusts the screen area for displaying the picture.
"Full Pixel": Displays the picture for 1080i or 1080p (except for component input)
sources in the original size when parts of the picture are cut off.
"Normal": Displays the recommended picture area.
"-1"/"-2": Enlarges the picture to hide the edge of the picture.
~
"Full Pixel" is available only when "Screen Format" is set to "Wide".
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture when "Screen Format" is set to "Smart"
(50 Hz), "Zoom" or "14:9".
Adjusts the vertical size of the picture when "Screen Format" is set to "Smart",
"Zoom" or "14:9".
You can select the options listed below on the
"Screen" menu. To select options in "Settings", refer
to "Navigating through menus" (page 22).
27
GB