Brother P-touch E500 User Manual page 51

Problem
When printing multiple
copies of a label, a
message is displayed
to confirm whether you
want the labels to be
cut after each label is
printed.
I do not know the
version number of the
firmware for the
P-touch.
Because the cut labels must not remain in the tape exit slot, the
message is displayed.
To disable the message display, press the Menu key, select
"Advanced" using the
Enter key. Select "Cut Pause" using the
press the OK or Enter key.
The version number and other information for the firmware can
be confirmed using the following procedure. Press the Menu
key, select "Version Info." using the
the OK or Enter key.
Solution
or key, and then press the OK or
or
or key, and then press
key, and then
1
2
3
4
5
6
7
8
51
What to do when...