Setting Exposure Compensation
Custom Function CF-6 enables the exposure compensation amount to be set in
CF
half-stop increments. See page 112.
• The exposure compensation amount's 1/3-stop or half-stop (enabled with Custom
Function CF-6) increments are indicated in the viewfinder and on the LCD panel
as shown below.
• The exposure compensation amount remains effective even after the <
is set to <
–1 1/2 exposure compensation
Exposure Compensation with the < > Button
Exposure compensation can also be set with the <
dial.
76
>.
–1 1/3 exposure compensation
Press the <
<
> dial within (
desired exposure compensation
amount.
• This is useful when you want to
apply
compensation to the entire roll of
film.
• To prevent the <
turning inadvertently and changing
the exposure compensation amount,
set the <
> switch
> button and <
> button and turn the
6
) to set the
the
same
exposure
> dial from
> switch to <
>.
>