Canon EOS-3 Instructions Manual page 125

Picture-Taking Custom Functions
1 Enable the <
exposure mode.
2 Enable the aperture to be set with the camera even with
the lens detached.
3 Set the shutter speed and aperture increments to full
stops.
4 Set the exposure compensation (including flash
exposure compensation) increments to half stops.
5 Prevent AEB from canceling when the lens is
interchanged or when film is replaced.
6 Set the AEB sequence to underexposure, standard
exposure, and overexposure.
7 Link spot metering to the focusing point.
8 Enable faster focusing point selection.
9 In the shutter speed-priority AE mode, enable a standard
exposure automatically even when the lighting conditions
change suddenly.
0 In the aperture-priority AE mode, enable a standard
exposure automatically even when the lighting conditions
change suddenly.
q Set second-curtain flash synchronization.
w Enable flash exposure lock with the <
e Enable flash exposure bracketing with studio flash.
r Set a correct flash exposure for a subject backlit by a
sunset. (Disable automatic reduction of flash output.)
t Set mirror lockup.
> dial to set the aperture in manual
Index of Custom Functions
> button.
No. Setting
CF-5 1, 3
CF-5 2, 3
CF-6 1
CF-6 2
CF-9 1, 3
CF-9 2, 3
CF-13 1
CF-13 1, 2
CF-16 1
CF-16 1
CF-15 1
CF-11 3
CF-5 1, 3
CF-14 1
CF-12 1
125