Canon EOS-3 Instructions Manual page 47

4. Eye-Control One-Shot AF Mode
You check the current CAL No. as follows:
Eye-Control AF Selection Failure
If the focusing point cannot be eye-selected, the <
blink and the camera will switch to automatic focusing point selection. See page 38.
1
Set the <
2
Turn the <
CAL No.
• The CAL No. lights if calibration has been
completed for that channel. If calibration
has not been completed, the CAL No.
blinks.
Set the <
3
Select the shooting mode.
4
While looking at the point to be
5
focused within the area AF ellipse,
press the shutter button halfway.
• The selected focusing point lights and
achieves focus.
Take the picture.
6
1 Set the < > switch to <
2 Press the <
• and the CAL No. will be displayed.
> switch to <
> dial to select a
> switch to < >.
>.
> button.
> icon in the viewfinder will
>.
47