Canon EOS-3 Instructions Manual page 39

● Using the <
focusing point
Automatic Selection
• When the dial is turned, the selected focusing point shifts in the following loop: Automatic
selection ↔ Left ↔ Center ↔ Right ↔ Automatic selection.
• This loop applies to all focusing point rows.
● Using the <
> dial to select a left or right
> dial to select an upper or lower focusing point.
• When the dial is turned, the selected focusing
• As shown in the figures, the focusing point
• This loop applies to all focusing point columns.
Focusing Point Selection
point shifts in the following loop: Automatic
selection ↔ Up ↔ Center ↔ Down ↔
Automatic selection.
selection shifts from single (
( ) to single ( ) focusing point(s).
• When double focusing points (
a re sel ect ed, f ocus ing poi nt
selection will be automatic.
• When double focusing points have
been selected and a left or right
focusing point is selected, only one
focusing point at a time will be
selected.
) to double
)
39