Set The Printing Effects - Canon EOS 400D Digital Instruction Manual

wPrinting with PictBridge
The print will have no white borders. If your printer cannot print
Borderless
borderless prints, the print will have borders.
Bordered The print will have a white border along the edges.
The shooting information* will be imprinted on the border on 9x13cm and larger prints.
Borderedc
xx-up Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
On A4 / Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF will be printed.
[20-upc] will have the shooting information* printed on the side
20-upc
of each thumbnail and the file number and date** printed on the
35-upp
bottom of each thumbnail image.
[35-upp] will have the file number and date** printed on the
bottom of the thumbnail images.
Default With a Canon printer, the print will be borderless.
* From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture,
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
** This depends on the <I> date/file number imprinting option set in step 5 (p.137).
EOff
EOn
EVivid
0B/W
0Cool tone
0Warm tone Prints in black-and-white with warm, yellowish blacks.
PNatural
PNatural M
Depending on the printer, certain items might not be displayed.
134
4
Same as the printing characteristics turned "On". No automatic
correction will be performed.
The image will be printed according to the printer's standard color. The
image's Exif data is used to make automatic corrections.
The image will be printed with higher saturation to produce more vivid blues and greens.
Prints black-and-white with true blacks.
Prints in black-and-white with cool, bluish blacks.
No automatic correction will be performed, and the image's
natural color and contrast will be retained.
The printing characteristics are the same as the "Natural" setting. However, this
setting enables finer printing adjustments than with "Natural."

Set the printing effects.

Set as necessary. If you need not set any
printing effects, go to step 5 on page 137.
Select the desired item on the upper
right, then press <0>.
Next, press the <U> key to select the
desired printing effect, then press <0>.