Advertisement
Step 1:
Orient and Slip-in the Middle Plate (3),
as shown.
The peripheral Inner walls of the
Middle plate, will closely hug the
outer walls of the Side stand.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
The Motorbike has to be held using the central
stand, and Side Stand, drawn to the sides, to
have access to the mounting of Large Side
stand.
Side Stand looks as shown, prior to the Start of
the Installation of SRC Large Side Stand.
Step 2:
Orient the Bottom Plate (5), in-line with
the Mounting Holes on the Middle Plate
and slide-in the M6 Screws from the
bottom side.
The Bottom plate has a rear side flap,
which closely hugs the Rear Periphery of
the Middle plate, to ensure orientation, as
well as to ensure No slackness.
Page 3
Advertisement
