THOMSON WHP8650 Operating Instructions Manual page 6

5. Charging
Fully charge the headphones once before using them for the first time
1
Switch off the headphones and connect them
Ensure that the headphones are switched off before charging them
Connect the USB charging cable included to the charging socket (6) Connect the free plug on the
micro-USB charging cable to a suitable USB charger To do this, consult the operating instructions
for the USB charger you are using
2
Charging process for the headphones
The LED (4) lights up solid red during the charging process Once the charging process is complete,
the LED (4) lights up blue
It can take up to 2 hours for the battery to be fully charged
Note
During the charging process, the Bluetooth
3 Battery capacity
When the headphone battery capacity is low, the LED (4) flashes red and a short signal tone is
heard
micro USB
2
:00
CHARGING h
red
® connection is automatically disconnected
m CHARGED
blue
5