Tradecraft Specialties UTILTR-2 Instruction Manual

Bed frame for twin mattress

Instruction Manual

Bed Frame For Twin Mattress

Model UTILTR-2

Due to the presence of small parts during assembly, keep

out of reach of children until assembly is complete.

Model UTILTR-2 Bucket Truck Bed Frame

Read all instructions before assembly and use.

Keep instructions for future use.

ADULT ASSEMBLY REQUIRED

Lancaster, PA 17601

tradecraftspecialties@gmail.com

www.tradecraftspecialties.com

Revised 03/28/2017

1900 Alfa Drive

(717) 269-8934

Page

1 of 6

Table of Contents

Need help?

Do you have a question about the UTILTR-2 and is the answer not in the manual?

Page 1 Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. 1900 Alfa Drive Lancaster, PA 17601 (717) 269-8934 tradecraftspecialties@gmail.com www.tradecraftspecialties.com Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 1 of 6...
Page 2 Please verify that you or your child does not have an allergy to linseed oil before using this product. General Specifications Assembled dimensions (approximate): 79" long, 39.5" wide, 24" high. Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 2 of 6...
Page 3 The smell should completely dissipate within several days. The smell may be stronger on products with areas of exposed unpainted material. Disassembly Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 3 of 6...
Page 4 Parts List Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 4 of 6...
Page 5 (1) screw at each end of support bar. Make sure support bar end is tight and perpendicular with side of bed. Start at rear of bed and work towards front. Leave 4.5” gaps between each support bar (approximately 7” center-to-center). Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 5 of 6...
Page 6 Step 4: Tighten all hardware. Make sure all assembled parts are tight and secure. Page Model UTILTR-2 Bucket Truck Bed Frame Revised 03/28/2017 6 of 6...