Table of Contents
Advertisement
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with
, and then adjust with
Adjustment Item
Contrast
Brightness
Color
Tint
Sharpness
• Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press
or
, one of the available choices appears in the following sequence:
Dynamic: Suitable for watching a normal motion picture.(Standard)
Real:
Makes a strong contrast picture.
Static:
Suitable for watching a still picture.
Press
to store.
* Select Dynamic, Real or Static to suit your taste.
• Setting Luminance (Luminance)
Luminance can be set.
Press
to make adjustments.
Press
to store.
* Settings can only be done when the Picture Mode is Static.
• Adjusting Color Temperature (Color Temp.)
Use
or
to specify a desired color temperature. Each time you press
available choices appears in the following sequence:
–3500:
More reddish colors
Standard: Standard color temperature
+3500:
More bluish colors
User:
User Color Temp. setup
Press
to store.
• Setting User Color Temp. (User Color Temp.)
Can set up when User is selected in Color Temp.
Press
or
to select Red, Green or Blue and press
Press
to store.
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted
individually at the factory.
* On-screen information disappears if you do not take any action for about 60 seconds.
* Functions may not be available with some models and some device options.
* The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
. Finally, press
Lower contrast
Darker screen
Lighter colors
More purplish colors
Softer pictures
or
, one of the
to make adjustments.
to implement the adjustments.
Higher contrast
Brighter screen
Darker colors
More greenish colors
Sharper pictures
User Color Temp.adjustment screen
E-11
Advertisement
Table of Contents
