MSA Power Builder 10002460 Instructions Manual
MSA Power Builder 10002460 Instructions Manual

MSA Power Builder 10002460 Instructions Manual

Advertisement

Power Builder
Battery Charger
instructions, 5 & 10 unit
This manual, including Warnings and Cautions inside, must be read and followed
carefully by all persons who will use or maintain the product, including those
who have any responsibility involving its selection, application, service, or
repair. This product will perform as designed only if used and maintained
according to the instructions. Otherwise, it could fail to perform as designed,
and persons who rely on this product could sustain serious personal injury or
death.
The warranties made by MSA with respect to the product are voided if
the product is not assembled, used, and serviced according to the
instructions in this manual. Please protect yourself and your employees
by following the instructions. Please read and observe the WARNINGS
and CAUTIONS inside. We encourage our customers to write or call for
a demonstration of this equipment prior to use, or for any additional
information relative to use or repairs.
Call 1-800-MSA-2222 during regular working hours.
TAL 201 (L) Rev. 1
© MSA 2002
Prnt. Spec. 10000005389 (C) Mat. 10002461
Doc. 10000000241
TM
part no.
10002460 - 5
unit.
10002439 - 10
unit.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Builder 10002460 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MSA Power Builder 10002460

  • Page 1 The warranties made by MSA with respect to the product are voided if the product is not assembled, used, and serviced according to the instructions in this manual. Please protect yourself and your employees by following the instructions.
  • Page 2: Cautions And Warnings

    Supervisors and users must read and understand these instructions before trying to use or service this product. We encourage our customers to write or call their MSA distributor or call Power Indicator MSA Customer Service for infor- Positive LED Lights...
  • Page 3: Operation

    Operation/Maintenance OPERATION MAINTENANCE LED Lights 1. Any battery must be recharged 1. Each charger is supplied with an (regardless of how long it’s been extra fuse for 230 VAC operation. used,) before the next use in order Replace any broken fuses with the to maintain the battery’s rated following types which are readily capacity and cycle life.
  • Page 4: Accessories And Replacement Parts

    Power Indicator/Charging/Replacing/Accessories/Tools • replace either negative contact, ACCESSORIES AND charging post retainer, positive REPLACEMENT PARTS charging key, or charging post base 1. Transformer - 10002464 • make sure retainer disk is ori- 2. Charging module - 10002462 ented properly 3. Power light module - 10002463 4.
  • Page 5: Troubleshooting Guide

    Troubleshooting Guide FAULT FINDING CHARGER NOT OPERATING power on illuminated? Check mains input fuse and confirm voltage is present and corresponds to voltage selected on changeover switch Check output from transformer is Check mains input 17V a.c. voltage selector switch is at correct setting Replace Has fuse...

This manual is also suitable for:

Power builder 10002439

Table of Contents