Installing Scansnap Manager; Connecting The Scanner; Connecting The Ac Cable - Fujitsu ScanSnap S510M Getting Started Manual

Installation starts.
4. To interact with ScanSnap Manager, double-click the
[FineReader for ScanSnap] icon.
ABBYY FineReader for ScanSnap starts up.
ABBYY FineReader for ScanSnap starts interacting with
ScanSnap Manager and the installation finishes.
You cannot perform any scan with the ScanSnap
ATTENTION
while the Quick Menu is opened.
●
For how to use ABBYY FineReader for
HINT
ScanSnap, refer to ABBYY FineReader for
ScanSnap Help topics.
●
If ScanSnap Manager has already been
installed before you install ABBYY FineReader
for ScanSnap, you will need to restart
ScanSnap Manager so that ABBYY FineReader
for ScanSnap can interact with ScanSnap
Manager.

2.1.3. Installing ScanSnap Manager

Please prepare the ScanSnap Setup CD-ROM.
1. Insert the "ScanSnap Setup CD-ROM" into the
CD-ROM drive.
The "ScanSnap" window appears.
To open the CD tray or to eject the CD, press
HINT
the button on the keyboard. If the
keyboard does not have the
and hold down the [F12] key instead.
2. Double-click the ScanSnap Manager icon.
The "Welcome to the ScanSnap Manager Installer"
window appears and the installation of ScanSnap
Manager starts.
3. Follow the instructions to install the software.
4. After the installation is complete, eject the CD-ROM
from the CD-ROM drive.
Refer to the "ScanSnap S510M for MacOperator's
ATTENTION
Guide" (Manual.pdf) in ScanSnap Setup CD-ROM
to learn more about ScanSnap Manager.

2.2. Connecting the Scanner

2.2.1. Connecting the AC cable

CAUTION
Do not use AC adapters other than the following
Manufacturer
LEI
SANKEN ELECTRIC CO,. LTD
1. Connect the AC cable to the AC adapter (collectively
called the power cable).
ScanSnap S510M for Mac Getting Started | 7
button, press
AC-adapter model number
NU40-2160250-I3
SEB55N2-16.0x (x= A-Z or Blank)