Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 66792MOP
Summary of Contents for AEG FAVORIT 66792MOP
- Page 1 User Manual FAVORIT 66792MOP Dishwasher FAVORIT 66792WOP...
-
Page 2: Table Of Contents
13. TECHNICAL INFORMATION..................23 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: Safety Instructions
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before any maintenance operation, deactivate the •... - Page 5 ENGLISH • The water inlet hose has a safety valve completed. There can be detergent and a sheath with an inner mains on the dishes. cable. • The appliance can release hot steam if you open the door while a programme operates.
-
Page 6: Product Description
3. PRODUCT DESCRIPTION Worktop Air vent Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container 3.1 TimeBeam The TimeBeam is a display that shows on the floor below the appliance door. -
Page 7: Control Panel
ENGLISH 4. CONTROL PANEL TimeSaver button On/off button Display Multitab button Program button RESET button Delay button Indicators MyFavourite button 4.1 Indicators Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5. - Page 8 Programme Degree of soil Programme phases Options Type of load • Heavy soil • Prewash • TimeSaver • Crockery, cut- • Wash 70 °C • Multitab lery, pots and • Rinses pans • Dry • Normal or light • Wash 45 °C •...
-
Page 9: Settings
ENGLISH Water Energy Duration Programme (kWh) (min) 12 - 14 0.7 - 0.9 75 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test info.test@dishwasher-production.com institutes... - Page 10 Water hardness German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
- Page 11 ENGLISH start to flash and the 2. Press display is blank. • The indicators 2. Press go off. • The indicators • The indicator continues to go off. flash. • The display shows the current • The indicator continues to flash.
-
Page 12: Options
There is also an acoustic signal that It is possible to change the colour of the sounds when the programme is TimeBeam to match the colour of the completed. By default this acoustic kitchen floor. There are several colours signal is deactivated but it is possible to available. -
Page 13: Before First Use
ENGLISH 7.2 Multitab The related indicator comes on. The display shows the updated Activate this option when you use multi- programme duration. tablets that integrate the salt, rinse aid and detergent functions. They can also 7.3 TimeSaver contain other cleaning or rinsing agents. This option increases the pressure and This option deactivates the release of the temperature of the water. -
Page 14: Daily Use
CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. - Page 15 ENGLISH 2. Press the on/off button to activate automatically the appliance when it is not the appliance. operating. Make sure that the appliance is in The function comes into operation: programme selection mode. • 5 minutes after the completion of the •...
-
Page 16: Hints And Tips
Opening the door while the Press and hold RESET until the appliance is in programme selection mode. appliance operates Cancelling the programme If you open the door while a programme is running, the appliance stops. It may Press and hold RESET until the appliance affect the energy consumption and the is in programme selection mode. -
Page 17: Care And Cleaning
ENGLISH 10.3 What to do if you want to • Put cutlery and small items in the cutlery drawer. stop using multi-tablets • Put light items in the upper basket. Make sure that the items do not Before you start to use separately move. - Page 18 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
-
Page 19: Troubleshooting
ENGLISH 11.2 Cleaning the upper spray 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously We recommend to clean regularly the turn it counterclockwise until it locks upper spray arm to avoid soil to clog the into place. - Page 20 With some problems, the display to contact an Authorised Service shows an alarm code. Centre. The majority of problems that can occur can be solved without the need Problem and alarm code Possible cause and solution You cannot activate the ap- •...
- Page 21 ENGLISH Problem and alarm code Possible cause and solution Small leak from the appli- • The appliance is not levelled. Loosen or tighten the ad- ance door. justable feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
- Page 22 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad- drops on glasses and dishes. just the rinse aid level to a higher level. • The quality of the rinse aid can be the cause.
-
Page 23: Technical Information
ENGLISH 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 850 / 610 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply max 60 °C Cold water or hot water... - Page 24 www.aeg.com/shop...