Final Preparation
•All stainless steel body parts should be
wiped with hot, soapy water and with a
liquid cleaner designed for this material.
If buildup occurs, DO NOT use steel
wool, abrasive cloths, cleansers, or pow-
ders! If it is necessary to scrape stainless
steel to remove encrusted materials,
Performance Checklist
A qualified installer should carry out the following checks:
•
Check top burner ignition.
Push and turn the knob "Full on" position.
The low flame should light at every port.
•
Check oven bake function bake burner on full power.
•
Check convection broil function broil burner at full power with convection fan
on.
•
Check convection fan function convection fan comes on when switch is turned
on.
Worktop burner knob
OFF
= Closed position
= "Full on" position (High flame)
= "Reduced rate" position (Low flame)
Rotary swicht knob
OFF
= Closed position
= Oven light on
= Oven light on + fan
= Fan
26
soak
with hot, wet cloths to loosen the ma-
terial, then use a wool or nylon scraper.
DO NOT use a metal knife, spatula, or
any other material tool to scrape stainless
steel! Scratches
arealmost impossible to remove.