Fujitsu FI-6130 Getting Started Manual page 15

Select [FUJITSU fi-6130dj] or [FUJITSU fi-6230dj],
and then click the [Select] button.
To use FUJITSU ISIS:
Select [Fujitsu fi-6130] or [Fujitsu fi-6230] and then
click the [Select] button.
8. Select [Scan] on the menu, and then select [Scan
Settings].
9. In the [Scan Settings] dialog box, clear the [Save to
file] checkbox.
HINT
You only check the operation now, so you do not have to
save to file.
10. Click [Scanner Setting].
11. Configure scanner settings such as the resolution
12. Click the [Scan] button.
When you are using FUJITSU TWAIN 32, you may see the
TWAIN Driver setup dialog box again. If so, click the [Scan]
button on the dialog box.
fi-6130/fi-6230 Image Scanner Getting Started
⇒
A setup dialog box appears for you to configure
scanner driver settings.
and paper size.
To use FUJITSU TWAIN 32:
On the dialog box below, configure scan settings, and
then click the [OK] button.
To use FUJITSU ISIS:
On the dialog box below, configure scanning settings,
and then click the [OK] button.
⇒
You are returned to the [Scan Settings] dialog box.
HINT
⇒
The document is scanned and the scanned image is
displayed in the [ScandAll PRO] window.
10