lap Bronx Spike 4503R Manual

This fitting has been designed to use energy efficient
and allow the bulb to cool before handling. Dispose
LED bulbs. Ensure that the minimum distance to the
of used bulbs carefully. Do not exceed the wattage
illuminated surface is not less than 0.5m (50 cm).
stated or use a different shape bulb from that indicated
on the fitting. Use of the incorrect bulb will damage the
Fitting/replacing bulbs: Max. 5W LED GU10
product and invalidate the guarantee. When changing a bulb, always switch off at the mains
Fitting/replacing bulbs: Max. 5W LED GU10
and allow the bulb to cool before handling. Dispose
This fitting has been designed to use energy efficient
of used bulbs carefully. Do not exceed the wattage
Care and cleaning: 9444R & 7591R This fitting has been designed to use energy efficient
LED bulbs. Ensure that the minimum distance to the
stated or use a different shape bulb from that indicated
LED bulbs. Ensure that the minimum distance to the
We recommend cleaning with a soft dry cloth. illuminated surface is not less than 0.5m (50 cm).
on the fitting. Use of the incorrect bulb will damage the
illuminated surface is not less than 0.5m (50 cm).
Do not use solvents or abrasive cleaners as these could damage the finish.
product and invalidate the guarantee.
When changing a bulb, always switch off at the mains
Care and cleaning: 4503R & 2491R
When changing a bulb, always switch off at the mains
and allow the bulb to cool before handling. Dispose
Care and cleaning: 9444R & 7591R and allow the bulb to cool before handling. Dispose
of used bulbs carefully. Do not exceed the wattage
In normal circumstances, stainless steel is very resistant to corrosion. It does however require maintenance to
of used bulbs carefully. Do not exceed the wattage
We recommend cleaning with a soft dry cloth. stated or use a different shape bulb from that indicated
preserve the high quality appearance. Wash the product with warm soapy water, removing all surface deposits. Rinse
stated or use a different shape bulb from that indicated
with clear water and with a soft cloth, wipe dry. In some cases, surface corrosion may arise after installation. This is Do not use solvents or abrasive cleaners as these could damage the finish. on the fitting. Use of the incorrect bulb will damage the
on the fitting. Use of the incorrect bulb will damage the
normally caused by tiny iron particles left behind after the brushing process when finishing. Wash and dry as detailed product and invalidate the guarantee.
Care and cleaning: 4503R & 2491R
product and invalidate the guarantee.
above. Then with a soft cloth soaked with a protective oil, wipe all over.
In normal circumstances, stainless steel is very resistant to corrosion. It does however require maintenance to
Care and cleaning: 9444R & 7591R
Care and cleaning: 9444R & 7591R
preserve the high quality appearance. Wash the product with warm soapy water, removing all surface deposits. Rinse
However if the product is subject to extreme environmental conditions such as marine locations, industrial pollution
We recommend cleaning with a soft dry cloth.
with clear water and with a soft cloth, wipe dry. In some cases, surface corrosion may arise after installation. This is
and acid rain these maintenance procedures should be carried out around four times a year. For severe corrosion, We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
normally caused by tiny iron particles left behind after the brushing process when finishing. Wash and dry as detailed
non-abrasive cream cleaners or proprietary stainless steel cleaners should be used to remove the corrosion. Wash Do not use solvents or abrasive cleaners as these could damage the finish.
Care and cleaning: 4503R & 2491R
above. Then with a soft cloth soaked with a protective oil, wipe all over.
and dry as detailed above. Then with a soft cloth soaked with a protective oil, wipe all over.
Care and cleaning: 4503R & 2491R
In normal circumstances, stainless steel is very resistant to corrosion. It does however require maintenance to
However if the product is subject to extreme environmental conditions such as marine locations, industrial pollution
In normal circumstances, stainless steel is very resistant to corrosion. It does however require maintenance to
preserve the high quality appearance. Wash the product with warm soapy water, removing all surface deposits. Rinse
Recycling advice
and acid rain these maintenance procedures should be carried out around four times a year. For severe corrosion,
preserve the high quality appearance. Wash the product with warm soapy water, removing all surface deposits. Rinse
with clear water and with a soft cloth, wipe dry. In some cases, surface corrosion may arise after installation. This is
non-abrasive cream cleaners or proprietary stainless steel cleaners should be used to remove the corrosion. Wash
with clear water and with a soft cloth, wipe dry. In some cases, surface corrosion may arise after installation. This is
normally caused by tiny iron particles left behind after the brushing process when finishing. Wash and dry as detailed
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
and dry as detailed above. Then with a soft cloth soaked with a protective oil, wipe all over.
normally caused by tiny iron particles left behind after the brushing process when finishing. Wash and dry as detailed
above. Then with a soft cloth soaked with a protective oil, wipe all over.
exist. Check with your Local Authority or retailer for recycling advice.
above. Then with a soft cloth soaked with a protective oil, wipe all over.
However if the product is subject to extreme environmental conditions such as marine locations, industrial pollution
Safety information Recycling advice
However if the product is subject to extreme environmental conditions such as marine locations, industrial pollution
and acid rain these maintenance procedures should be carried out around four times a year. For severe corrosion,
and acid rain these maintenance procedures should be carried out around four times a year. For severe corrosion,
non-abrasive cream cleaners or proprietary stainless steel cleaners should be used to remove the corrosion. Wash
For your safety, always switch off the supply before cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
non-abrasive cream cleaners or proprietary stainless steel cleaners should be used to remove the corrosion. Wash
and dry as detailed above. Then with a soft cloth soaked with a protective oil, wipe all over.
exist. Check with your Local Authority or retailer for recycling advice.
and dry as detailed above. Then with a soft cloth soaked with a protective oil, wipe all over.
The bulb is protected by a shade. This part must be replaced immediately should the shade
Safety information
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked
Recycling advice
Recycling advice
Shade
For your safety, always switch off the supply before cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
Batch date
exist. Check with your Local Authority or retailer for recycling advice.
exist. Check with your Local Authority or retailer for recycling advice. The bulb is protected by a shade. This part must be replaced immediately should the shade
The batch date is shown on the product in the format yyWxx. The first two numbers represent the year of production
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked
Safety information
and the last two numbers after the 'W' represent the week of production within that particular year.
Safety information
Shade
For your safety, always switch off the supply before cleaning.
For your safety, always switch off the supply before cleaning.
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands. Batch date
The bulb is protected by a shade. This part must be replaced immediately should the shade
The batch date is shown on the product in the format yyWxx. The first two numbers represent the year of production
The bulb is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
and the last two numbers after the 'W' represent the week of production within that particular year.
Replace Cracked
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked
Shade
Shade
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands.
Batch date
Batch date
The batch date is shown on the product in the format yyWxx. The first two numbers represent the year of production
The batch date is shown on the product in the format yyWxx. The first two numbers represent the year of production
and the last two numbers after the 'W' represent the week of production within that particular year.
and the last two numbers after the 'W' represent the week of production within that particular year.
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands.
Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands.
KNG2048283_ONLINE.indd 1
0.5m
0.5m
0.5m
12/11/2019
12/11/2019
12/11/2019
12/11/2019
Bronx Spike Floor Light
4503R, 2491R, 9444R, 7591R
Bronx Spike Floor Light
Bronx Spike Floor Light
4503R, 2491R, 9444R, 7591R
4503R, 2491R, 9444R, 7591R
V21220 BX220IM
Manufacturer:
UK Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom
www.diy.com | www.screwfix.com | www.screwfix.ie
To view instruction manuals online, visit www.kingfisher.com/products
EU Manufacturer:
Kingfisher International Products B. V .
Rapenburgerstraat 175E,
1011 VM Amsterdam, The Netherlands
www.kingfisher.com/products
17/12/2020 11:01