GMI GMCR Assembly Instructions

GMCR-Standard Rack - ASSEMBLY INSTRUCTIONS

Components

Upright Brace Support Straight Shelf Arm Incline Shelf Arm
Single Sided Upright Double Sided Upright
Assemble side plates to rack upright using (2) 3/8" x 4" and (4) 3/8" x 1" Hex Bolts and 3/8" nylock nuts.
Attach the front plate to the two side plates as shown using (4) 3/8" x 1" Hex Bolts and 3/8" nylock nuts.
Attach shelf arms to uprights using the (1 per arm) 3/8" x 4 " in the desired position.

Wall Bracket

Mount wall bracket to upright using (2) 3/8" x 4" Hex Bolts. Position
as necessary to fasten to secure wall.
Attach the angled retainer plate to the front plate as
shown in Fig.1 using (1) 3/8"x1" Hex head bolt and nylock
nut.

Shelf Arm

Upright - Length Varies
Base Side Plates
Fig.1
Front Plate
The height and width of the upright will vary with the size of rack ordered. Assembly concept is the same
for all units. Double sided racks will have the base side plates with the mount holes for the uprights centered.
Double sided racks will require two front plates per upright assembly.