Starting The Washing Program - Filling The Boiler - Gastro-M Maestro DK353 Operating And Installation Instructions

(-), turning it counter- clockwise the flow is increased (+). We recommend that
you let the constructor to adjust it (or the specialized personnel of the authorized
local dealer who sold the appliance).
Before you perform these works, you should turn off the switch of the appliance
or turn off the corresponding switches so that no current flows, or turn off the
power supply switch.
INDICATION: The feeder should not operate while dry, since it will loose its
suction properties. It is necessary that you have filled the storage compartment
before the appliance's installation, so that the feeder operates correctly during
the first wash.
Do not use caustic products. If you do not follow this indication, you will not be
covered by the guarantee.

2.7 Starting the washing program - Filling the boiler

Overflow hose
Suction filter
• When the water of the boiler is heated, the corresponding LED lights off
(Nο.4 - Page 3) and a new LED lights on (Nο.5 - Page 3) showing us
that the water in the dispenser is heating up.
Note 1: At the model 35 (basket 35 x 35) the indicator (No. 4 - Page 3)
continues to light on while the boiler is heating.
• When this LED lights off, then the dishwasher is ready for wash.
• Open the door. Insert the basket with the items (dishes, glasses, etc.). Before
www.info@saro.de
• Check that the suction filter, in the tank, has been
placed in the correct position.
• Check that the overflow hose is inserted correctly in
its inlet.
• Make the connection with water supply and drainage
according to the instructions.
• Push ON-OFF switch (No.1 - Page 3)
• The dishwasher is automatically filled with water up
to the set water level.
• The indicator lights on (Nο.4 - Page 3)
showing us that the boiler's heating has started.
30