Advertisement
)((' .H\ 6HOI 7HVW
See Figure 33.
1. Turn off the printer.
2. Press and hold the FEED key while
turning on the power.
3. Release the key after the DATA light
turns off (approximately
five seconds).
The FEED Key Self Test prints out at
various darkness settings above and
below that of the darkness value shown
on the configuration label. Look at these
labels and determine which one has the
best darkness setting for your application.
This value can be entered into the printer
by setting the darkness during the
configuration procedure. Refer to
page 40 for more information.
The value printed on that label is added to
(+) or subtracted from (–) the darkness
value specified on the configuration label. The resulting numeric value
(0 to 30) is the best darkness value for that specific media/ribbon combination.
76
All manuals and user guides at all-guides.com
Bradyprinter 200MVP and 300MVP User's Guide
Figure 33
Advertisement
