Counter Display - Fujitsu FI-4750C Cleaning And Maintenance

Counter Display

The scanner is provided with a
counter display.
Counter Function
Paper counter When the
button is pressed
When the
button is pressed
Abrasion counter Abrasion counter counts the accumulated number of the scanned sheet. This
counter increments at every 10 sheets. This counter is useful to check the
cleaning cycle or parts replacement cycle. How to reset is described in
Chapter 6.
NOTE
When the counter value is 0, no number is displayed.
The paper counter counts the number of scanned sheets
from the start of reading until Paper Empty or until an
error is detected. The counter is automatically reset at
the start of reading. The counter is used for checking
the number of sheets scanned at one time.
This counter increments each time a document is
scanned. The counter is not initialized until the power is
turned off. The counter can be used, for example, for
checking the number of sheets that have been scanned
in one day.
Paper counter
Abrasion counter
1-7