Everycom EC400 User Manual page 4

Ÿ
Please remove the battery from printer if you plan not to use printer for long time, please store printer
and battery separately.
Ÿ
Before inserting or removing the battery from printer, please make sure printer is properly shutdown
and power adapter is not connected to printer.
Ÿ
Thermal prints fade away , if you don't want this to happen, please use long term thermal paper.
Ÿ
The printer is only suitable for using below 2000M altitude.
Ÿ
The printer is only suitable for use in non-tropical reason/climates.
PRECAUTIONS TO TAKE WHILE USING BATTERY
Ÿ
Please read this manual and marking label on the battery carefully .
Ÿ
Please charge the battery indoor , make sure the room temperature is within recommended limits.
Charging in high temperature environment may cause over heating of battery and may result in
explosion of battery .
Ÿ
Please do not try disassembling the battery, doing so will cause short circuit or electrolyte leakage. If
this electrolyte went into eyes, ut may cause permanent blindness. If accidently such leakage went
into eyes, please rinse immediately and rush to hospital for treatment.