Notes And Cautions; Installation; Charging - Samsung VR30T80 Series User Manual

Notes and cautions

Installation

NOTE
• Install the Docking Station in a place where the floor and wall are level.
• If the cleaning area is wooden floors, it is best to install the Docking
Station along the grain of wooden floors.
• If the power switch is off, the Jet Bot will not charge even if it is docked
on the Docking Station.
• Always keep the Docking Station on.
– If power is not supplied to the Docking Station, the Jet Bot cannot find it
and cannot automatically recharge.
– If the Jet Bot is left detached from the Docking Station, the battery will
drain naturally.
• Do not attach the Boundary Markers as (-----) shape.
– The Jet Bot may not detect it and cross the boundary.

Charging

NOTE
• If the battery overheats during charging, it may take longer to charge.
• When auto charging is not working, do the following:
– Turn the power switch (at the side the Jet Bot) off and on again.
– Unplug the Docking Station's power plug and then plug it back on.
– Unplug the Docking Station, and then check whether there is any foreign
matter on the charging pins and clean charging pins of the Jet Bot and
the Docking Station with a dry cloth or rag.
– Check for any obstacles such as reflective objects, chairs, etc. near the
Docking Station.
34 English