Table of Contents
Advertisement
OPERATION
Charging the Jet Bot
Before using the Jet Bot for the first time, charge it completely. (For the charging time and
cleaning time, refer to the 'Product specification'.)
OFF
Status
Indicator
16
English
ON
1 Open the upper cover of the Jet Bot and
remove the white gasket.
2 Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
– During booting, the Jet Bot's Status
Indicator turns on with a melody which
stops when the booting is complete.
– When you turn the Jet Bot on for the
first time after purchase, check the
SmartThings App connection(refer to
p.29-33) and installation of the Docking
Station following the voice guide of the
Jet Bot.
3 Place the Jet Bot on the Docking Station
manually to start charging.
– Make sure the charging terminals on
the Jet Bot and the Docking Station are
aligned.
4 Check the charging status.
– When charging starts, the Status
Indicator of the Jet Bot turns on (red,
orange, or yellow depending on charging
progress), it rises gradually, and changes
to green when the charging is complete.
Advertisement
Table of Contents
