Table of Contents
Advertisement
3 If a pop-up saying that a new device has been found appears, tap ADD NOW.
– If the pop-up does not appear, add a device by selecting the 'Home appliances' category →
'Robot cleaner' and the Jet Bot to connect.
– If you scan the SmartThings QR code attached on the Jet Bot, you can connect to the Jet
Bot more easily.
4 [Android] The connection to your device will be progressed automatically.
– [iOS] Open the setting app, and select [vacuum]_E30AJT** in the Wi-Fi list.
5 Provide the authentication when you are directed to do so.
6 [Android] The connection to your wireless router will be progressed automatically.
– [iOS] Open the setting app, and select the wireless router in the Wi-Fi list.
7 When the product registration is complete, the Jet Bot device card is added.
NOTE
• When the Jet Bot cannot be registered to the SmartThings App
– Refer to the SmartThings App guide or pop-up messages.
– Confirm that the UPnP option of your wireless router is active, and then try the registration
procedure again.
– Confirm that your wireless router is operating in a wireless mode. If not, change it to the
wireless mode and try again.
– If you have two or more Jet Bots, turn off the other Jet Bots, and then try to register your
Jet Bot again.
– Change the name of the wireless router which has the same SSID to be distinguished from
each other.
• If the Jet Bot and smartphone are not connected to the same wireless router, a response can
be delayed depending on the network environment.
– When the wireless router is changed, the connection between the Jet Bot and the
SmartThings App is disconnected.
– After changing the wireless router, register your Jet Bot again at the SmartThings App.
Software Update
• When the Jet Bot is charging on the Docking Station, the Jet Bot connects to the server
and checks for software updates. If a new software is found, the Jet Bot will automatically
download and update it.
• If the Status Indicator of the Jet Bot turns violet and stays violet while charging, it means
that the Jet Bot is being updated. Please wait until rebooting is complete.
English 31
Advertisement
Table of Contents
