Sealey APMS50UCS Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to Wear
instruction Protective
manual gloves
1. safety
WarNINg! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this

storage system.
locate in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

WarNINg! use storage on level and solid ground, preferably concrete.

Keep the storage system clean and tidy in accordance with good workshop practice.

Keep children and unauthorised persons away from the work area.

do Not use the storage system for any purpose other than that for which it is designed.

do Not use the storage system outdoors.

do Not place the storage system in a damp or wet location or an area where there is condensation.

do Not clean the storage system with any solvents which may damage the surfaces or the protective coating.

do Not move the storage system when there are items placed inside.

do Not step on the shelves.

do Not overload the storage system.

2. INtroductIoN
modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
3. sPecIfIcatIoN
model no: ............ aPms50ucs upright connector single
size W x d x H: ......................................32.5 x 30 x 1420mm
model no: ........... aPms50ucd upright connector double
size W x d x H: .........................................65 x 30 x 1420mm
model no: ....................................... aPms50BP Back Panel
size W x d x H: .......................................615 x 24 x 1052mm
Hole dimensions:................................................ 9.1 x 9.1mm
Hole distance: .............................................................. 29mm
model no: ...............aPms52 2 door floor cabinet 680mm
size W x d x H: .......................................680 x 458 x 910mm
model no: .............................aPms53 Wall cabinet 680mm
size W x d x H: .......................................680 x 281 x 350mm
model no: ...aPms54 Wall cabinet tambour front 680mm
size W x d x H: .......................................680 x 281 x 350mm
model no: ............ aPms57 cabinet multi-function 680mm
size W x d x H: .......................................680 x 458 x 910mm
© Jack sealey limited
instructions for
modular storage system
aPms serIes
model no:
Original Language Version APMS SERIES | Issue 1 14/04/16