Reset To Factory Settings; Cleaning; Descaling - Breville Nespresso PIXIE BEC430 Instruction Manual

RESET TO FACTORY SETTINGS

Factory settings: Espresso cup: 40 ml, Lungo cup: 110 ml; Auto Off mode: 9 mins.
1 LEDs will blink fast 3 times to confirm machine has been reset
to factory settings.
LEDs will then continue to blink normally, as heating up, until ready.
- Steady Lights: ready
With machine turned off, press
and hold down the Lungo
button for 5 seconds.

DESCALING

www.nespresso.com/descaling
1
Remove the capsule and close the lever.
UM_PIXIE_BREVILLE.indb 9
Duration approximately 15 minutes
Read the safety precautions on the descaling package and refer to the table for the frequency of use (see page 10)
2
Empty the drip tray and the used capsule
container.

CLEANING

Do not use any strong cleaning agent or
solvent cleaner. Do not put in a dishwasher.
Never immerse the appliance or
part of it in water
Clean the coffee outlet regularly with a damp
cloth.
3
Fill the water tank with 0.5 L of water and add
the Nespresso descaling liquid.
1
To assemble the cup support and the drip tray:
take off the grid, place them side by side and clip
the drip tray to the cup support.
4
Place a container (minimum volume: 0.6 L) under
the coffee outlet.
13.11.18 10:13
EN
9