Montarbo WIND PRO Series User Manual page 12

WIND PRO
THE NEW SERIES WIND PRO E EARTH PRO
2
WIND PRO 208A WIND PRO 210A WIND PRO 212A WIND PRO 215A
WIND PRO
The series consists of four amplified
loudspeakers designed and developed to offer excellent
performance in terms of SPL and frequency response,
equipped with 2 woofers, one of which is coaxial. The
compact elegant design is of great impact thanks to the birch
plywood cabinet with a polyurea finish and the reinforced
internal structure. The loudspeakers offer a lot of dynamics
in the low frequency range and the advanced M-Modelling
algorithm eliminates internal interference. The M-Modelling
technology allows a sound reproduction that is perfectly
consistent with the input signal. Each loudspeaker boasts 2
Dante ports that extend connectivity, from analog to digital,
with the possibility to connect multiple loudspeakers on a
network. A dedicated bracket system is available, designed
for horizontal and vertical suspension of the Wind Pro 208
and the Wind Pro 210 loudspeakers. A series of flybars
designed for the Wind Pro 212 and Wind Pro 215 allows
them to be suspended in array mode. You can easily
control each loudspeaker on the network thanks to the
M-Connect software designed by Montarbo. User-friendly
and user-customizable interface allows you to control every
single parameter of each loudspeaker simultaneously or in
groups. First-class audio level and innovation, together with
an advanced acoustic design, integrated with intelligent
accessories and software, offer solutions for any kind of
application.
EARTH PRO
The series consists of 2 amplified subwoofers
designed to offer excellent performance in terms of SPL and
frequency response. The compact elegant design is of great
impact thanks to the birch plywood cabinet with a polyurea
finish and the reinforced internal structure. The woofer,
loaded in a 6th order band-pass configuration, guarantees
a fast, powerful extended bass response. The loudspeakers
offer a lot of dynamics in the low frequency range and
the advanced M-Modelling algorithm eliminates internal
interference. The M-Modelling technology allows a sound
reproduction that is perfectly consistent with the input
signal. Each loudspeaker boasts 2 Dante ports that extend
connectivity, from analog to digital, with the possibility to
connect multiple loudspeakers on a network. You can easily
22
EARTHPRO115A EARTHPRO118A
control each loudspeaker on the network thanks to the
M-Connect software designed by Montarbo. User-friendly
and user-customizable interface allows you to control every
single parameter of each loudspeaker simultaneously or in
groups. First-class audio level and innovation, together with
an advanced acoustic design, integrated with intelligent
accessories and software, offer solutions for any kind of
application.
M-CONNECT
The proprietary Montarbo M-Modelling technology allows,
through sophisticated algorithms, a sound reproduction
perfectly consistent with the input signal.
Montarbo Modelling introduces a sophisticated processing
technique that performs a precise temporal correction of
the loudspeaker system eliminating the effect of internal
reflections that occur inside the horns and waveguides and
introducing small "echoes" and repetitions in the response
impulse as well as reducing unwanted resonances in the
mid-low frequencies of the loudspeaker system.
This careful processing technique introduces an equalization
in the time domain, making the loudspeaker system
able to reproduce most of the frequency components
simultaneously and, above all, to dampen sustain and
repetitions as soon as the signal ends.
M-MODELLING
The M-Connect software designed by Montarbo lets you
easily control each loudspeaker on a network. Through
the connection via CAT cable and an easy-to-use and
user-customizable interface, you can control every single
parameter of each loudspeaker simultaneously or in groups.
Each compatible device can be inserted into the network and
controlled individually or in groups for common parameters.
You can modify the single system equalization intended as
loudspeaker or groups, you can also modify levels, delay
and mute. The software allows you to select the analog and
digital inputs, modify the network parameters and monitor
some data of the connected devices such as the operating
temperature.
WIND PRO 208A
3
The Montarbo WIND PRO 208A is an amplified acoustic
loudspeaker designed to guarantee extremely high
performance in terms of power and quality. The "Quasi 3-vie"
acoustic design combined with a sophisticated audio signal
processing system defines the new point-source standard,
result of a 1" (voice coil: 1.7") high-frequency coaxially horn-
loaded driver with a 8" transducer with 2" voice coil, and an
additional 8" woofer with 3" voice coil. The birch plywood
cabinet with a polyurea finish is characterized by high
strength thanks to a complex structure of internal wood and
steel reinforcements.
The two woofers, loaded in back-reflex configuration,
A
C
B
F
E
H
A Neodymium coaxial woofer with 1" driver and 8"
transducer.
B 8" neodymium woofer with 3" voice coil
C
Birch plywood cabinet with abrasion-resistant finisch.
D Black painted steel protective grille.
E Carrying handle.
F
Control and connection panel.
User manual
guarantee a fast, powerful defined low-frequency response,
without interference in the middle range thanks to the
asymmetrical crossover that allows only the upper woofer
the reproduction of the vocal range. The coaxial coupling of
the high frequency driver ensures a coherent and transparent
overall response, and an extremely linear 110° symmetrical
dispersion. The Class-D amplifier features two high-efficiency
channels, ensuring 1600W RMS total power that allows the
speaker 132 dB SPL with 70 Hz to 20 kHz frequency response.
D
G
H
G Pole-mount adapter.
H
Pickup points
Materials and construction methods meet the highest
professional standards in order to ensure maximum
reliability.
23