Seat Removal - Honda FourTrax Rubicon TRX520FA5 2020 Owner's Manual

Seat Removal

Refer to Safety Precautions on page 121.
The seat must be removed for the air cleaner, engine oil, engine oil
filter, spark plug, battery and fuse maintenance and to remove the
rear fender cover and tank cover assembly, to access the owner's
manual, air pressure gauge, 40 A spare fuse and fuse puller.
(4)
(1) seat latch
(2) seat
(3) front prongs
(4) tank cover
Removal
1. Pull the seat latch (1) at the rear of the seat.
2. Slide the seat (2) back and lift it.
Installation
1. Insert the front prongs (3) into the backside of the tank cover (4)
and hooks (5) on the frame, and press the studs (6) into the
grommets (7).
2. Press down on the seat until locks.
132 Servicing Your Honda
(3) (2)
(5) (7)
(6)
(5) hooks
(6) studs
(7) grommets
(1)