Remote Start Troubleshooting - ADS TR1150AK Owner's Manual

Following a remote start command, please note that the engine will turn off when any door is physically opened
during the remaining engine runtime.
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in 'Valet Mode'. The 'Valet Mode'
will disable remote start functionality. To activate or deactivate the 'Valet Mode', follow the instructions below:
With Vehicle Key:
Cycle ignition OFF/ON 2x rapidly, then press brake 3x.
FUNCTION
Valet Mode ON
Valet Mode OFF
With iDatastart Remote:
Turn ignition ON, then press
FUNCTION
Valet Mode ON
Valet Mode OFF
With iDatastart Antenna:
Turn ignition ON, then press & hold button for 5 seconds
FUNCTION
Valet Mode ON
Valet Mode OFF

REMOTE START TROUBLESHOOTING

If your iDatastart remote fails to start the vehicle, the parking lights will flash three times immediately, then
flash a number of times according to the errors below:
# OF PARKING LIGHT FLASHES
1
2
# OF PARKING LIGHT FLASHES
1
2
# OF PARKING LIGHT FLASHES
1
2
2022-03-16 © Automotive Data Solutions Inc. 9/14
TR1150AK