Front Panel Components; Attaching The Port Replicator; Detaching The Port Replicator - Fujitsu LifeBook S-5582 User Manual

L i f e B o o k S S e r i e s – S e c t i o n F o u r

FRONT PANEL COMPONENTS

The following is a brief description of the optional Port
Replicator's front panel components.
Docking Port
The docking port connects the optional Port Replicator
to your notebook. (Figure 4-11)
Port Replicator Release Latch
Slide the Port Replicator Release button to remove the
Port Replicator from your notebook. (Figure 4-11)
C A U T I O N
Do not hold the system by the Port Replicator. The Port
Replicator and/or the system could be damaged if the
Port Replicator is used as a handle.

ATTACHING THE PORT REPLICATOR

The Port Replicator can be attached on your notebook
while the power is on, while in suspend mode, or while
the power is off. To attach the Port Replicator follow
these easy steps:
1. Align the Port Replicator connector on the lower
surface of your notebook with the connector on top
of the Port Replicator.
2. Push your notebook down to connect it to the Port
Replicator securely. (Figure 4-12)
Figure 4-12 Attaching the Port Replicator
48
Docking Port
Figure 4-11 Port Replicator front panel

DETACHING THE PORT REPLICATOR

The optional Port Replicator can be detached from your
notebook while the power is on, while in suspend mode,
or while the power is off. To detach the Port Replicator
follow these easy steps:
1. Slide the Port Replicator's release button to the right
2. Lift up your notebook to detach it from the
Port Replicator Release Latch
to release the lock. (Figure 4-13)
Port Replicator.
Figure 4-13 Detaching the Port Replicator