Front Panel Components; Attaching The Port Replicator; Detaching The Port Replicator - Fujitsu Lifebook S4542 User Manual

L i f e B o o k S S e r i e s – S e c t i o n F o u r

FRONT PANEL COMPONENTS

The following is a brief description of your Port
Replicator's front panel components.
Docking Port
The docking port connects the Port Replicator to your
LifeBook. (Figure 4-16)
Port Replicator Release Latch
Slide the Port Replicator Release button to remove the
Port Replicator from your LifeBook. (Figure 4-16)

ATTACHING THE PORT REPLICATOR

The Port Replicator can be attached on your LifeBook
while the power is on, while in suspend mode, or while
the power is off. To attach the Port Replicator follow
these easy steps:
1. Align the Port Replicator connector on the lower
surface of your LifeBook with the connector on top
of the Port Replicator.
2. Push your LifeBook down to connect it to the Port
Replicator securely. (Figure 4-17)
Figure 4-17 Attaching the Port Replicator
56
Docking Port
Figure 4-16 Port Replicator front panel

DETACHING THE PORT REPLICATOR

The Port Replicator can be detached from your LifeBook
while the power is on, while in suspend mode, or while
the power is off. To detach the Port Replicator follow
these easy steps:
Port Replicator Release Latch
1. Slide the Port Replicator's release button to the right
to release the lock. (Figure 4-18)
2. Lift up your LifeBook to detach it from the
Port Replicator.
Figure 4-18 Detaching the Port Replicator
C A U T I O N
Do not carry your LifeBook with the Port Replicator
attached to it. The Port Replicator might fall off
and break.