Advertisement
Quick Links
Connecting a 3
Version No 1.4
Model: C4000
Date: 13/06/2019
Compac Industries Ltd.
52 Walls Road. Penrose. Auckland 1061. New Zealand.
PO Box 12 417. Penrose. Auckland 1642. New Zealand.
Tel: +64 9 579 2094 Fax: +64 9 579 0635 info@compac.co.nz
www.compac.co.nz
rd
Party Meter
Advertisement
Related Manuals for Compac C4000
Summary of Contents for Compac C4000
- Page 1 Party Meter Version No 1.4 Model: C4000 Date: 13/06/2019 Compac Industries Ltd. 52 Walls Road. Penrose. Auckland 1061. New Zealand. PO Box 12 417. Penrose. Auckland 1642. New Zealand. Tel: +64 9 579 2094 Fax: +64 9 579 0635 info@compac.co.nz www.compac.co.nz...
- Page 2 See the following photo for the location of the Triscan interface board in this application. Wiring To hold the Electrical certificate for the C4000 the meter must be connected to the C4000 via a barrier. The below is the wiring to connect the C4000 Power supply to a 3 party Open collector output meter.
- Page 3 J12 Connector There are 4 connections that are made when conecting a 3 party meter to the C4000 power supply. These are Meter power, (12 to 15 volts) Channel A, Channel B and Ground. From 3 party meter Channel B...
- Page 4 Brodie Meter Connections The Brodie meter can be connected to the C4000. Shown is the Brodie connection board: And shown are the connections: Brodie meter C4000 Pin 1 12 volt power supply From 3rd party Power 12 to 15 volts...
Need help?
Do you have a question about the C4000 and is the answer not in the manual?
Questions and answers